Sea Water RO Membrane
Sea Water RO Membrane
AMFOR® seawater reverse osmosis elements offer the highest productivity while maintaining excellent salt rejection
Product specifications
Product | Active Surface | Applied Pressure | Permeate Flow | Stanilized Salt | Maximum feed | Recovery |
SW30-2514 | 6.5(0.6) | 800(55) | 150(0.6) | 99.4 | 6(1.4) | 2 |
SW30-2521 | 13(1.2) | 800(55) | 300(1.1) | 99.4 | 6(1.4) | 4 |
SW30-2540 | 30(2.8) | 800(55) | 750(2.6) | 99.4 | 6(1.4) | 8 |
SW30-4021 | 33(3.1) | 800(55) | 800(3.0) | 99.4 | 16(3.6) | 4 |
SW30-4040 | 80(7.4) | 800(55) | 1950(7.4) | 99.4 | 16(3.6) | 8 |
1. Permeate flow and salt rejection based on the following test conditions: 32,000 ppm NaCl, 800 psig (55 bar), 77。F (25℃),
2. Permeate flows for individual elements may vary +/-20%.
Product | Active Surface | Applied Pressure | Permeate Flow | Stanilized Boron | Minimum Salt | Stabilized Salt |
SW30-8040 | 400(37) | 800(55) | 6500(24.6) | 91 | 99.5 | 99.7 |
1、Permeate flow and salt rejection based on the following test conditions: 32000ppm NaCl, 5ppm Boron，800psi (5.5Mpa ） 25 ℃ PH =8, 8% recovery。
| Product Name | Dimensions - inches (mm) | ||
| A | B | C | |
| SW30-8040 | 40.0(1016) | 1.125(29) | 7.9(201) |
Maximum operating pressure
For small sea water element ................................................................................................................................... 1000psi(69.0bar)
For SW30-8040 .......................................................................................................................................................... 1200psi(83.0bar)
Maximum Operating Pressure .................................................................................................................................. 600psi (41.0bar)
Maximum Operating Temperature ...................................................................................................................................... 113 (45℃)
pH Range, Continuous Operation ................................................................................................................................................. 2-11
pH Range, Short-Term Cleaning (Max.@50℃) .......................................................................................................................... 1-12
Maximum Feed water Turbidity .................................................................................................................................................... 1NTU
Maximum Feed Silt Density Index ........................................................................................................................................................ 5
Free Chlorine Tolerancec..................................................................................................................................................... ＜ 0.1ppm